Wagner paint sprayer reset button

Help with PC build not booting

2023.03.22 17:33 BigRedPillow Help with PC build not booting

I just purchased parts for a new PC but can't get it to boot. The only things I now have plugged in to my Gigabyte B650 Aorus Elite AX motherboard are 2x 8GB TeamGroup DDR5 4800 MHz in slots A2/B2, a Ryzen R7600X, and the power connectors for the motherboard and CPU. The only sign of life I see is when I turn on the PSU switch after it's been off for a while (10 seconds or so) there is a brief blip of a red LED somewhere in the bottom right of the motherboard (near CMOS). When I hit the RST_SW button or short the RST connector, nothing happens. What I've tried:
What am I missing? Is there any way to test if the issue is the CPU/motherboard/RAM? I don't have access to a similar system to test the components individually. I've done this twice before and not had this perplexing of an issue. Please help!
submitted by BigRedPillow to buildapc [link] [comments]


2023.03.22 17:07 SystemInvecklare Trail Mix - Snapshot 23w12a Is Out!

Well hello fellow Minecraft lovers! It is time for the first snapshot for 1.20. We know we promised no more major features, so how did we end up with such a big snapshot? You thought the trails were over? NO! In snapshot 23w12a we have even more tales to tell! Our devs apparently could not resist throwing in a few extra additions. Enjoy!
This update can also be found on minecraft.net.
If you find any bugs, please report them on the official Minecraft Issue Tracker. For any feedback and suggestions on our upcoming 1.20 features, head over to the dedicated Feedback site category.

New Features

Vibration Resonance

Calibrated Sculk Sensors

Archaeology

Armor Trims

New armor trim Smithing Templates have been added to the following structures:

Signs

Sniffer Egg

Pitcher Plant

Changes

Vibration Frequencies

In preparation for the Calibrated Sculk Sensor, vibration frequencies have been greatly simplified to prevent unwanted interference. The following are category descriptions for each frequency and the expected events that they correspond to:
  1. Movement in any medium (land, water and air)
  2. Landing on any surface (land or water)
  3. Item interactions
  4. Gliding with an elytra or unique mob actions (Ravager roar, Wolf shaking, etc)
  5. Dismounting a mob or equipping gear
  6. Mounting a mob or interacting with a mob
  7. Mobs and players getting damaged
  8. Consuming items (drinking and eating)
  9. Blocks 'deactivating' (door close, chest close, button unpress, etc)
  10. Blocks 'activating' (door open, chest open, button press, etc)
  11. Blocks changing (cauldron water level rising, adding food to campfire, etc)
  12. Blocks being destroyed
  13. Blocks being placed
  14. Mobs and players teleporting or spawning
  15. Mobs and players dying or an explosion

Combination Step Sounds

Armor Trims

Technical Changes

Structure post-processors

Capped post-processor

Rule post-processor block entity configuration

Game Events

Tags

Step Sounds

Display entity

Interpolation changes

Fixed bugs in Snapshot 23w12a

Get the Snapshot

Snapshots are available for Minecraft Java Edition. To install the Snapshot, open up the Minecraft Launcher and enable snapshots in the "Installations" tab.
Testing versions can corrupt your world, please backup and/or run them in a different folder from your main worlds.
Cross-platform server jar:

What else is new?

For previous changes for Minecraft 1.19.4 and new features for Minecraft 1.20, see the previous release post. Read more about the changes in the Wild update in the release post
submitted by SystemInvecklare to MinecraftUnlimited [link] [comments]


2023.03.22 17:07 SystemInvecklare Trail Mix - Snapshot 23w12a Is Out!

Well hello fellow Minecraft lovers! It is time for the first snapshot for 1.20. We know we promised no more major features, so how did we end up with such a big snapshot? You thought the trails were over? NO! In snapshot 23w12a we have even more tales to tell! Our devs apparently could not resist throwing in a few extra additions. Enjoy!
This update can also be found on minecraft.net.
If you find any bugs, please report them on the official Minecraft Issue Tracker. For any feedback and suggestions on our upcoming 1.20 features, head over to the dedicated Feedback site category.

New Features

Vibration Resonance

Calibrated Sculk Sensors

Archaeology

Armor Trims

New armor trim Smithing Templates have been added to the following structures:

Signs

Sniffer Egg

Pitcher Plant

Changes

Vibration Frequencies

In preparation for the Calibrated Sculk Sensor, vibration frequencies have been greatly simplified to prevent unwanted interference. The following are category descriptions for each frequency and the expected events that they correspond to:
  1. Movement in any medium (land, water and air)
  2. Landing on any surface (land or water)
  3. Item interactions
  4. Gliding with an elytra or unique mob actions (Ravager roar, Wolf shaking, etc)
  5. Dismounting a mob or equipping gear
  6. Mounting a mob or interacting with a mob
  7. Mobs and players getting damaged
  8. Consuming items (drinking and eating)
  9. Blocks 'deactivating' (door close, chest close, button unpress, etc)
  10. Blocks 'activating' (door open, chest open, button press, etc)
  11. Blocks changing (cauldron water level rising, adding food to campfire, etc)
  12. Blocks being destroyed
  13. Blocks being placed
  14. Mobs and players teleporting or spawning
  15. Mobs and players dying or an explosion

Combination Step Sounds

Armor Trims

Technical Changes

Structure post-processors

Capped post-processor

Rule post-processor block entity configuration

Game Events

Tags

Step Sounds

Display entity

Interpolation changes

Fixed bugs in Snapshot 23w12a

Get the Snapshot

Snapshots are available for Minecraft Java Edition. To install the Snapshot, open up the Minecraft Launcher and enable snapshots in the "Installations" tab.
Testing versions can corrupt your world, please backup and/or run them in a different folder from your main worlds.
Cross-platform server jar:

What else is new?

For previous changes for Minecraft 1.19.4 and new features for Minecraft 1.20, see the previous release post. Read more about the changes in the Wild update in the release post
submitted by SystemInvecklare to Minecraft [link] [comments]


2023.03.22 16:57 Newflyer3 Anyone notice the TNGA cars to be 'worse' than the older stuff?

Did a service on my 2007 LS460, so my expectations would be near the top and everything would be a downgrade, but do any of you people notice that Lexus cars have gotten worse in the past few years? Not because they're bad, but because the gap between a Toyota and the Lexus has closed with the TNGA cars?
Sat in both an NX and RX in the showroom. NX was cramped, lots of piano black by the shifter. Fully loaded executive model here in Canada is 75k OTD to get ML audio and open pore wood trim and the steering wheel doesn't have a wood option. Everything has transitioned to the screen and there's hardly physical buttons to do anything. Prius style shifter... There was also a cut out near the bottom for puddle lamps, but there's no lamp there at all. Run flat tires... LS had a full size alloy wheel in the trunk with a TPMS reader. Drove like a tarted up RAV4 (350) that was a little faster.
Sat in the RX F Sport 1, much better size. Chrome window trim didn't line up between the doors. Not sure if that's a Canadian built thing compared to a J Vin. Door sill trim is integrated in the interior plastic and doesn't have a separate metal trim sill on the outside, so I'm seeing exposed painted frame as I open the door. Took the 350h out for a drive, and fuck, the 4 cylinder CVT just kills it. Gutless compared to the V6 and buzzy while gunning it. 70k for that thing with a 4 banger. Guess that's what we get if we want 35mpg. V6 took regular but we were doing 19 mpg mixed driving with it.
Both our LS and 2011 RX have semi aniline interior, so I guess this Nuluxe is supposed to be the 'vegan' option? Doesn't feel too bad, but my dad just called it vinyl interior. He's not really interested in the new stuff saying that they're just whoring the CUVs out from the factory. He went on and looked at IS since it's still the old tech with gated shifter, V6. Too small for him unfortunately.
They don't make them like they use too as far as I'm concerned.
submitted by Newflyer3 to Lexus [link] [comments]


2023.03.22 16:55 digital4kcollector (Offer) list (request) list

I split all splitable titles If you want a full code please let me know.
​ *Disney/Marvel/Star Wars all hd unless marked as 4k *
​ *hd unless marked otherwise collections* ​
​ *HD unless noted as 4k* ​
TV shows
Standard definition and XML Titles
ISO
submitted by digital4kcollector to uvtrade [link] [comments]


2023.03.22 16:45 notoriousyjk SOS! Input and Rewind Settings Keep Resetting

I am running JelOS on my RG353V and 353P.
I have been going into Retroarch input settings to save my fast forward/rewind buttons to R1/L1 while removing those buttons from my Save/Load state shortcut, and I also have turned on the Rewind setting. However, when I boot up my games, the settings reset to where when I press R1/L1, the game fast forwards and saves the state at the same time. The rewind setting is also reset to where I have to open retroarch in the game and turn it on manually.
Can anyone help me with this so I can essentially set those settings and never go back into Retroarch unless I absolutely have to please? Thank you!
submitted by notoriousyjk to RetroArch [link] [comments]


2023.03.22 16:37 thetruebrockman Genie side mount issues

Good day, I'm having problems with my Genie 6170h. It will go periods of time, like a week, operating as it should. Then if i go try to open it, it will just click, the indicator lights are all green, then I will try pushing the wall unit button, and sometimes it will click with the lights green, sometimes it will click with the rround LED flashing red. Which tells me there is an obstruction in the path of the laser of the safe-t-beam, but there's not. I will then unplug it, and reset the up and down limits, and the force controls. Sometimes that fixes it for a week or so, sometimes it doesn't. I've left it alone for a couple days then it will start working properly. So frustrating, not sure what the heck is going on. By the way, this opener was installed Feb 17/22. So it's not that old.
Thanks,
submitted by thetruebrockman to GarageDoorService [link] [comments]


2023.03.22 16:37 Eyeklops X4 Public Beta 6.00 Beta 7 Release Notes (Trimmed)

Version: 6.00 Beta 7 (496124) - Last updated: 2023-03-22

Version: 6.00 Beta 6 (495649) - Last updated: 2023-03-16

Version: 6.00 Beta 5 (495135) - Last updated: 2023-03-08

Version: 6.00 Beta 4 (494230) - Last updated: 2023-02-22

Version: 6.00 Beta 3 (493483) - Last updated: 2023-02-09

Version: 6.00 Beta 2 (492699) - Last updated: 2023-01-26

submitted by Eyeklops to X4Foundations [link] [comments]


2023.03.22 16:21 ItzSteambun "Stuck" on start up Logo Screen

Just recently put together an AMD set up using a Gigabyte B650 GAMING X AX. When starting the PC it will reach this screen and sit there indefinitely until I press the DEL key - after which it will take me to the desktop and is then working 100% normally. I've seen posts with similar problems but no one seems to be able to reach the desktop as I can by pressing the DEL key.
The only problem is this Start up Logo screen. The PC will sit on this screen for 10+ minutes, and as soon as I press the DEL key it will take only a moment to take me to the desktop.
1) How do I get the PC to boot directly to Desktop as it should? 2) Why on earth would pressing DEL take me to desktop and not the BIOS?
Things I've tried: - Updating to latest BIOS - Resetting CMOS by: unplugging PSU, removing motherboard battery, holding power button for several seconds, reinserting battery, rebooting - Setting correct boot drive order - Load optimized defaults in BIOS - Moving Windows OS to new SSD (and setting boot order) - Disabling " Full Screen LOGO show " in BIOS (The same problem occurs, just on the System start up page, rather than Gigabyte)
Any suggestions would be appreciated.
PC Specs: https://au.pcpartpicker.com/list/gRzDY9
https://preview.redd.it/cvqxzu812bpa1.jpg?width=4032&format=pjpg&auto=webp&s=b32f72b1c08055c015ceb8c8200ed54efc511d62
submitted by ItzSteambun to gigabyte [link] [comments]


2023.03.22 16:20 Trevicarus I had my notepad open while I played the game and this is my comprehensive list of suggestions. So far.

GENERAL QUALITY OF LIFE:
• Character selection
• Rename and delete save files
• Coloured bars beneath player names increasing/decreasing to indicate health level
• Adjustable player volumes
• Proximity chat (with an voice chat indicator near the minimap)
• Radio chat could be toggled on or off while it remains on the players' chests (with an radio chat indicator near the minimap)
• Player icon (and menu name) flickers to indicate talking
• Guaranteed collection of at least 1 seed from planter harvests
• More seeds in general
• Store 100 Resin at a time to shelves
• Hold shift + right click to store 10 (or maximum) items to shelves
• Hold C to stack max amount to storage (prevents removing walls behind storage)
• Hold shift + right click to add 10 (or maximum) items to the crafting mat
• Items no longer fly off of shelves when grabbing more than the maximum amount
• Indicator for bench to show its facing side
• Improve hitboxes for lighting standing torches
• Add cardinal directions to the map
• Add bed icons to the map when completed (like tarps)
• GPS locators being removable after permanent death of Virginia or Kelvin
• Trees regrow after 4 seasons if the stump is left unbroken
• Reset Keybinds option
• Animal collision with structures
• Book or file to reread collected story notes
• Lighter is stowed once fires are lit
• Hammer icon on map indicating incomplete builds
• Important GPS markers display a general area instead of the direct location
• Full firewood stack blueprint when laying down the first log
• Campfires in world-generated camps being usable
• Photo mode keybind (hides HUD)
• Hold C to remove placed campfire sticks
• Consume items directly from shelves
• Flashlight could be placed on the backpack

COMPANIONS:
• Kelvin being able to fetch meat/fish and dry it out on the nearest racks
• Kelvin taking less damage from logs
• Set Home and Go Home commands
• K and V prioritizing following the Host by default and when their leading player leaves
• Virginia receiving commands to receive items, patrol the immediate area or follow the players
• Virginia does not destroy player garden plants with guns
• Virginia's GPS marker being a V by default

ENEMIES:
• Giving cannibals meat/fish or killing their attacking mutants will make the tribe passive towards players
• Cannibals retreat from players if they are spared after cowering on the ground
• Cannibals who are spared by players return to their tribe and become more neutral towards the player as a whole
• Cannibals can be tied up when downed and brought to stakes to see how they damn well like it
• Worms (John 2.0) having a louder and more distinct sound
• Blind Mutants being unable to detect players who remain completely still while they use echolocation
• Most (especially Blind Mutants) enemies investigating a thrown/shot stone
• Titans wearing bone armour or animal hides because they look really silly right now

ITEMS:
• Zipline rope length limit indicator
• Increased zipline length
• Rope Gun could be used to spear fish from a distance
• Sleds print in 2 stages; allowing players to combine both pieces when crafting (justifies the printing size)
• Fishing nets
• Left click to drop a golf ball down at the players' feet
• Crossbow scope
• Better Paper Target placement against logs
• Paper Targets on sticks
• Flashlight and laser sight placement to the bottom or sides of weapons
• Making spawned island loot finite; skin pouches yield more ammo, meds, rope, etc
• Increased spawn rate of skin pouches
• Guitar becomes playable when holding a button
• Wearing full sets of armour grants an additional buff:
- Leaf Armour: Double movement speed when crouched
- Hide Armour: Extra warmth and weather resistance
- Bone Armour: Increased stagger chance
- Creepy Armour: Blind and Baby Mutants no longer attack
- Tech Armour: Decreased stamina, thirst and hunger drain
• 3D Printed Items:
- Golf Tees
- Abseiling Anchors
- Pellets for Slingshot
- Aiming Reticle for Compound Bow
- Throwing Knives
• Relocate items such as radios and laptops

BUILDING:
• Literally every blueprint from the first game
• Animal hide decorations (rugs, wall tapestries, bed covers, etc)
• Leaf decorations (curtains, bench covers, etc)
• Feather decorations (chair covers, bone wind chimes, masks, etc)
• Boats
• Effigies (cannibal and mutant)
• Animal trophies
• Hammocks
• Flag trail markers/stone cairns
• Stone floors, fences and stairs
• Grave markers
• More log strut placements
submitted by Trevicarus to SonsOfTheForest [link] [comments]


2023.03.22 16:13 SherNut Micro Button Mushrooms polymer Clay - Hand Crafted and painted -5 pieces

Micro Button Mushrooms polymer Clay - Hand Crafted and painted -5 pieces submitted by SherNut to u/SherNut [link] [comments]


2023.03.22 15:42 GoblinMLU 2.0.4 (107) - Planet Challenge and Quest Rework update (5% on Android)

2.0.4 (107) - Planet Challenge and Quest Rework update (5% on Android)

2.0.4 (107)
We have rolled out 2.0.4 (107) to 5% of Android users! We will slowly increase % ! Please be patient and thank you for understanding! If you have received the update - please don't spoilt it to other community members! Use spoiler feature till update is rolled out 100% for both platforms!

Patch Notes for 2.0.4 (107)

What's new: - Added a new feature "What's new". - After updating the game, a new screen will pop up and show small patch notes! - More detailed patch note still found in our Discord Server! 

Planet Challenges: - Rework of the "time dungeons" into “Planet challenges”! Every dungeon has their own set of bosses. Minimum of 3 custom dungeons per planet challenge. Starting with Gaia. - Player has to complete the current challenge 3 times to unlock the next challenge. Challenges can be completed an unlimited amount of times and once open they stay open. Players who have completed the whole planet can play all of the challenges several times a day. - Each dungeon has set of rewards that can be boosted - Free to play rewards - Boosted rewards (multiplier is applied after paying universe bucks or watching an ad) - Level progression is tracked by a percentage. Percentage of progression is updated by killing minions & bosses. Difference between Time Dungeons & Planet Challenges - resources farmed are not included in progression - VIP owners can complete the challenge automatically by pressing “rush” button next to travel 

Quest Redesign: - Quests are available to the player starting from planet Trollheim and speaking with Adventurer NPC. There are 3 quests available to the player, once the player has opened the quest menu = the quests become active and start counting progress. - New quests can be accessed by waiting for the timer to run out or by watching an ad to reroll available quests. - Quest reward amounts are based on quest difficulty, the default reward for completing a quest are in-game Quest Tokens - Quest “Main” reward becomes claimable once “x” quests are completed - Quests are split into 2 categories (new quest system removes “invasion” quests) - Deliver "x" amount of resources - Hunt "x" amount of monsters - Player can receive up to 3 quests at the same time from any category. - Quest are accessible through NPC on planets, menu side button, clicking on progression panel - Quests are split into 5 difficulty levels, represented by keys under the quest. Difficulty directly influences the amount of monsters to be slain & amount of resources to be gathered & donated to the planet. Each difficulty equals to an amount of time to be played by the player - Quests can be reset in two methods: - Reroll by watching ad - Reroll with ticket - Completing quests awards players keys that are counted towards the grand prize. Keys are a direct representation of quest difficulty = more difficult quests will grant more progress towards the prize. Prize can also be boosted. - Once the main reward is claimed - a timer appears when the next “grand prize” will become active & refreshed. During the “refresh” period all quests completed do not count or accumulate towards the next grand prize's progress. - Grand prize can be completed in an unlimited amount of times - Once a grand prize is claimed a “refresh” period timer appears - Once the refresh period expires, a new grand prize appears. - When a grand prize is claimed - a reward screen appears informing the player about rewards he received. In this screen player is able to boost a random reward. - VIP users will be able to “boost” the rewards of the grand prize for free - Rewards: - Blueprints / Capacity - Resource Reward 

Objective System for Gaia and Trollheim: - Improved New player Experience - It is a way of guiding players through a game's story and objectives. - Upon finishing the task, rewards will be granted. 

New UI: - Reworked the way resources are shown to player - Added permanent universe bucks counter - Added players "profile" as temporary access to settings screen, in future reworked in to a proper players profile with achievements & statistics 

Cloud Saves: - Reworked the way cloud saves function, potentially removing issues that some users face with disappearing planet progress - Reduced the load on devices battery during saving - Reduced cloud saving intervals 

Other: - Locked Event decoration fix - New Push notifications - UI pet disable - Bug Fixes 
submitted by GoblinMLU to MyLittleUniverse [link] [comments]


2023.03.22 15:30 BeatSaberOfficial Alpha Branch: Beat Saber Updated Unity Version

Hey players,
We just released the Alpha Branch of Beat Saber on the updated Unity version. We'd highly appreciate it if you can test it and provide your feedback before we move to Beta. Note: This update doesn't include any new music or feature content.

Changes:
- Upgrade of Unity version to 2021.3.16f1
- The game now uses OpenXR instead of OpenVR on PC

Known issues
- Starting the game without a headset connected will result in a crash
- Reset orientation button may not work

- The user pointers may disappear after removing the headset

- Music may not play in the game lobby when loaded in
- Saber orientation may be offset to the default
- Saved scores for any song will be displayed for all other songs in 'Party Mode'
- Scores are not cleared after clicking the 'Clear' button in 'Party Mode'
- Text in Korean and Japanese may look highlighted
- Spectating a multiplayer game will result in the application becoming headlocked

Testing channels are available for Steam, Oculus PC and Meta Quest devices:
Quest: unity_alpha
Oculus PC: unity_alpha
Steam: unity_alpha - public alpha
submitted by BeatSaberOfficial to beatsaber [link] [comments]


2023.03.22 15:11 le__nerd Android 12: from bricking my phone to making it better

TLDR: Chinese 1+7pro variant got bricked by OTA Android 12 update. Clean install made it smoother and more battery efficient then Android 11.

The OTA GM1913_11_h.36 update: bricking my phone

I have had a chinese OnePlus 7 pro (GM1910) flashed with EU ROM (GM1913) since release date. The updater gave me a push notification yesterday there was an update to Android 12 (GM1913_11_h.36), up untill then android 11 was my latest version. Given I had read mixed reviews about Android 12 for the 1+7pro I backed up my most important files so I could rollback if needed. Suprisingly, the update worked and I was running Android 12, however the scaling of the UI was very weird as everything seemed huge. Deciding to do a reboot to see if that would help, the phone got stuck in a bootloop. Sometimes it would boot to the recovery where it would say, after selecting the English language:
System error, after select language please select online update (keep data) to reovery system, thanks!

Unbricking my phone

The only solution I had found to solve this issue was to download the OnePlus MSM tool to flash the phone through EDL mode. I found this guide (blog post) pretty helpfull to:
After that, it was pretty straight forward to use the MSM tool, this video helped.
After some minutes (5?) the phone booted to Android 11!

Updating without bricking

Now I had a working phone again, I went through the setup doing the bare minimum of configurations and downloaded the Oxygen Updater app from the playstore. Using that app, I downloaded the complete zip (not the incremental) update file for the latest version of Android 12 for the EU 1+7pro. I did the upgrade using the "local upgrade" option in the settings of the phone. After the update succeeded, I waited for a couple of hours whilst chaging the phone, thinking that perhaps the recovery is being updated in the background which caused it to brick previously. Once that time passed I did a normal reboot followed by a reboot to the recovery menu to do a factory reset once again. After this factory reset I set up my phone as usual.

Android 12 for the 1+7 Pro seems good now

Being scared Android 12 would be horrible on the 1+7 Pro given the online reviews from the initial review, I didn't went to the trouble of redownloading all my apps and files yet given I might roll back to Android 11 if things went south again. However, as of my first impression everything now runs very smooth and the battery life is better then it was on Android 11. This might be in part due to my phone having fewer apps then before but I feel the new animations also help in making the phone feel smoother since there is less time looking at a frozen screen. Would I recommend doing the upgrade? Well, only if you are willing to backup your most important files and maybe starting from a factory reset phone on OS 11 and then following this post from "Updating without bricking". My experience may be due to the use of a chinese phone with EU firmware tho.
I hope sharing this experience can help anyone in a similar situation.
submitted by le__nerd to OnePlus7Pro [link] [comments]


2023.03.22 14:53 day_veid LIFX Switch Control (no seperate tiles)

hi all, we have 3 switches. two of the them downstairs as the ones i am troubleshooting. they are setup in the same way as the upstairs one.
SWITCH 1; terminal 1 - not wired terminal 2 - wired terminal 3 - wired terminal 4 - wired
SWITCH 2: terminal 1 - wired terminal 2 - wired terminal 3 - wired terminal 4 - not wired
I have reset the switches and re-setup on LIFX app and also re-paired to HomeKit 2/3 times on each switch. my issue is relating to the dumb lights which should appear as seperate tiles. i used to be able to hold on the switch (tile with configurable buttons - single, double, hold) and there used to be a button “show as seperate tiles” which would then remove the switch from view and keep the dumb lights as individual tiles.
setting up the purely configurations on homekit is confusing as the shortcut e.g single press is either turninimg the light ON or OFF not the opposite of what it is.
overall my existing switch upstairs is setup the same exact way in the LIFX app yet that one has the individual lights as tiles whereas the two switches downstairs keeps creating 4 x configurable switch accessory per switch not the dumb light switches.
is this behaviour normal? the dumb lights appear as switches only when trying to create a action on the switch via homekit (short, long press). however there used to be a simple button which would just convert them to 4 dummmy switch buttons on homekit
https://ibb.co/fSKN8H1 https://ibb.co/9HY6ShD https://ibb.co/jHYYnyv https://ibb.co/nwYLx2Z
submitted by day_veid to lifx [link] [comments]


2023.03.22 14:53 random246688 nothing is good anymore

I just exist. I'm 16, in my final year of high school, and I should be full of excitement for the life ahead of me, and I should feel motivated to work hard to achieve my dreams, and I should be enjoying life with my friends...yet here I am. useless.
I haven't felt good about myself in what feels like years. I either hate myself, or I feel nothing at all. Things went downhill from the beginning of high school. My academics kept getting worse, and my extra curriculars didn't get much better. I haven't had a lasting relationship, and my longest friendship is on the verge of ruin because of my jealousy (my best friend is better than me in literally every single way). I am super unhealthy and lag behind pretty much everyone in my class when it comes to fitness. I can't even do basic daily things without screwing up, which just makes me feel more dumb.
I have become a failure. I have failed my parents, and I have failed myself. There is nothing about me right now that I can be proud of, and I'm running out of time to turn things around. And even after being fully aware of the state that I'm in, I cant seem to get myself to do better. I'm simply watching my life pass me by. Now, I do not wish to end my life or hurt myself, but I wish there was a reset button. I wish I could start all over again. But that's just life I guess.
submitted by random246688 to depression [link] [comments]


2023.03.22 14:22 Joa_Sage Dell Inspiron 3515 not charging the battery. Help!

Hello everyone thanks for having the time to read this and trying to help. I would appreciate a solution ASAP. Thanks in advance.
THE PROBLEM:
When I connect the AC Power Adapter, the battery icon shows a charging symbol but the percentage is always stuck in that percentage. The battery discharges normally in 3 hours of usage (normal behavior) but never charges when I plug it on. Also, even if I keep for 1 hour the charger connected, then disconnect it and then restart the laptop, the battery will still be in that % but now will discharge. This shows a healthy battery. I ran a health check and it's 88% of capacity, which means it can still store energy (it is a new device, I mean..). My battery went 0% two times so far and I was able to make it charge from there by: 1. Turning off the laptop. 2. Connect the AC power adapter (since the battery reached 0% and cannot turn it on without the adapter). 3. Hold the power button for 30 seconds to perform an RTC BIOS reset. (After this the orange LED blinks 2 times indicating a successful reset). 4. Accept the warning message about the successful reset.
  1. When Ubuntu is loaded, after signing in I unplug the AC power, so the laptop turns off.
  2. When I connect the adapter again, the white LED indicator turns on immediately meaning that the battery is being charged. After 2-3 hours of charging I disconnect and turn on the laptop without the adapter but with 100% of battery.
THINGS TO KNOW:
- Note 1: Every time I connect the AC Adapter, and the battery has more than 0%, this white LED indicator turns on only for 5 seconds and turns off immediately. This is kind of weird since this normally happens when the battery reaches 100% meaning that it does not need to charge anymore.
- Note 2: I tried disconnecting the battery from the motherboard and performing a power reset holding for 15 - 20 seconds the power button, just like explained on the dell webpage, and then connecting everything back but nothing. I left the laptop battery disconnected for 24 hs and still nothing.
- Device: Dell Inspiron 3515 bought in August 2022.
- Hardware update: This version came with 8 gb of ram, so I upgraded it to 16 gb adding a SODIM 8gb ram. (October 2022).
- Operating System: I installed Ubuntu 20.04 LTS and I'm constantly adding updates that Ubuntu offers me related to security and performance.
- Bugs:
- My mouse pad for some reason sometimes gets sucked when I use the "double touch" gesture to scroll. (Drivers incompatibility indicators from the OS) I found this issue and its a OS bug that has been reported already.
- Sometimes when I open the laptop, the screen holds like a video bug like pure pixels RGB but distorted for 1 second, and then it shows the image. (Another indicator)
- BIOS VERSION: 1.2.0 - Info in BIOS: AC Power adapter: <65W> (it is detected)
- Dell Support Assist diagnosis: All looking great. No issues were found. Battery healthy and AC power detected successfully.

POSSIBLE SOLUTIONS THAT I CAN IMAGINE:
- BIOS update? - Go back to windows 10? - Try another version of Linux? Is this a battery charge cycle driver problem or something similar?
Thanks a lot for the support and I hope to get help.
submitted by Joa_Sage to Laptop [link] [comments]


2023.03.22 14:21 Joa_Sage Dell Inspiron 3515 not charging the battery.

Hello everyone thanks for having the time to read this and trying to help. I would appreciate a solution ASAP. Thanks in advance.
THE PROBLEM:
When I connect the AC Power Adapter, the battery icon shows a charging symbol but the percentage is always stuck in that percentage.. e.g. 5:33 until full (30%) which is a lot to reach 100%. This changes every time i plug and unplug: 12 hours remaining, 6 hours to full, 11 hours. The OS makes bad predictions.
The battery discharges normally in 3 hours of usage (normal behavior) but never charges when I plug it on. Also, even if I keep for 1 hour the charger connected, then disconnect it and then restart the laptop, the battery will still be in that % but now will discharge. This shows a healthy battery. I ran a health check and it's 88% of capacity, which means it can still store energy (it is a new device, I mean..).My battery went 0% two times so far and I was able to make it charge from there by:
  1. Turning off the laptop.
  2. Connect the AC power adapter (since the battery reached 0% and cannot turn it on without the adapter).
  3. Hold the power button for 30 seconds to perform an RTC BIOS reset. (After this the orange LED blinks 2 times indicating a successful reset).
  4. Accept the warning message about the successful reset.
  5. When Ubuntu is loaded, after signing in I unplug the AC power, so the laptop turns off.
  6. When I connect the adapter again, the white LED indicator turns on immediately meaning that the battery is being charged. After 2-3 hours of charging I disconnect and turn on the laptop without the adapter but with 100% of battery.
THINGS TO KNOW:
- Note 1: Every time I connect the AC Adapter, and the battery has more than 0%, this white LED indicator turns on only for 5 seconds and turns off immediately. This is kind of weird since this normally happens when the battery reaches 100% meaning that it does not need to charge anymore.
submitted by Joa_Sage to techsupport [link] [comments]


2023.03.22 14:18 Joa_Sage Laptop Dell Inspiron 3515 does not charge the battery.

Hello everyone thanks for having the time to read this and trying to help. I would appreciate a solution ASAP. Thanks in advance.
THE PROBLEM:
When I connect the AC Power Adapter, the battery icon shows a charging symbol but the percentage is always stuck in that percentage. e.g. 5:33 until full (30%) which is a lot to reach 100%. This changes every time i plug and unplug: 12 hours remaining, 6 hours to full, 11 hours. The OS makes bad predictions.
The battery discharges normally in 3 hours of usage (normal behavior) but never charges when I plug it on. Also, even if I keep for 1 hour the charger connected, then disconnect it and then restart the laptop, the battery will still be in that % but now will discharge. This shows a healthy battery. I ran a health check and it's 88% of capacity, which means it can still store energy (it is a new device, I mean..).My battery went 0% two times so far and I was able to make it charge from there by:
  1. Turning off the laptop.
  2. Connect the AC power adapter (since the battery reached 0% and cannot turn it on without the adapter).
  3. Hold the power button for 30 seconds to perform an RTC BIOS reset. (After this the orange LED blinks 2 times indicating a successful reset).
  4. Accept the warning message about the successful reset.
  5. When Ubuntu is loaded, after signing in I unplug the AC power, so the laptop turns off.
  6. When I connect the adapter again, the white LED indicator turns on immediately meaning that the battery is being charged. After 2-3 hours of charging I disconnect and turn on the laptop without the adapter but with 100% of battery.
THINGS TO KNOW:
- Note 1: Every time I connect the AC Adapter, and the battery has more than 0%, this white LED indicator turns on only for 5 seconds and turns off immediately. This is kind of weird since this normally happens when the battery reaches 100% meaning that it does not need to charge anymore.
- Note 2: I tried disconnecting the battery from the motherboard and performing a power reset holding for 15 - 20 seconds the power button, just like explained on the dell webpage, and then connecting everything back but nothing. I left the laptop battery disconnected for 24 hs and still nothing.
- Device: Dell Inspiron 3515 bought in August 2022.
- Hardware update: This version came with 8 gb of ram, so I upgraded it to 16 gb adding a SODIM 8gb ram. (October 2022).
- Operating System: I installed Ubuntu 20.04 LTS and I'm constantly adding updates that Ubuntu offers me related to security and performance.
- Bugs:
- My touch pad for some reason sometimes gets sucked when I use the "double touch" gesture to scroll. (Drivers incompatibility indicators from the OS) I found this issue and its a OS bug that has been reported already.
- Sometimes when I open the laptop, the screen holds like a video bug like pure pixels RGB but distorted for 1 second, and then it shows the image. (Another indicator)
- BIOS VERSION: 1.2.0- Info in BIOS: AC Power adapter: <65W> (it is detected)
- Dell Support Assist diagnosis: All looking great. No issues were found. Battery healthy and AC power detected successfully.

POSSIBLE SOLUTIONS THAT I CAN IMAGINE:
- BIOS update?- Go back to windows 10?- Try another version of Linux? Is this a battery charge cycle driver problem or something similar?
Thanks a lot for the support and I hope to get help.
submitted by Joa_Sage to Dell [link] [comments]


2023.03.22 14:16 ohhidied LEGACY: From the Book of SAW (Chapter 16 & 17) The Survivors

Read chapter 15 here: https://www.reddit.com/saw/comments/11rvp3u/legacy_from_the_book_of_saw_chapter_15_dr_steward/
___________________________________________________
*** CHAPTER 16 **\*
William Schenk enters a shabby apartment complex carrying a red, portable cooler. He passes the commonly empty front desk and proceeds upstairs. When he reaches his floor, he sees a call girl exiting his neighbor's apartment. He flashes a charming smile and keeps moving. His neighbor, ashamed, says, "Hey Bill…," But Bill doesn't stop. He offers a wave and continues down the hall.
Aside from a small TV and newspaper articles, his flat is almost barren. He places the cooler on the kitchen counter and heads into his bedroom. Opening the closet door, he procures a small, aqua green, square-shaped box and a thin strand of rope, approximately four feet in length.
He sets the box on the living room table, then grabs the portable cooler. On the table in front of him, he switches on an old radio, quickly tuning the device to a new station.
The reporter begins to speak about the mass grave that's been discovered, while Bill stuffs the box full of newspaper. He then opens the cooler and places the contents into box. The final step is to wrap the box with the rope, making the perfect knot and bow.
In the kitchen, he takes a black marker from a ceramic cup and writes a note on a small white tag. He slips the rope through a pre-punctured hole on the label and ties it off. Satisfied, The Organ Donor admires his work, then places the gift inside the freezer.
*** CHAPTER 17 **\*
Paint dripped on the precinct floor as Lincoln made his way to the restroom. He locked the door, unbuttoned his shirt, set it on the counter, and unhooked the latch on his brace. The Detective slowly removed the homemade cilice, exposing a throng of metal spikes that had left dozens of painful indentations in his skin. Lincoln stared at his scarred torso, stoic to the pain he had caused himself as repentance. As he watched the blood spill from several small wounds, he remembered cradling Roy's head, and in his mind, Lincoln felt he deserved this.
He allowed his sores a moment to breathe while he struggled to remove the paint from his shirt and jacket. Five minutes passed, and he was granted only a moderate improvement. He reapplied the painful undergarment, breathed sharply, and buttoned his shirt.
On the way to his office, he is approached by an officer, "Detective Riley," she says, "Renee Walsh would like to speak with you."
"Where is she?"
"Agent Webb is interviewing her now. Right, this way."
Following his colleague to the Booking Room, Lincoln feels the cilice pressing against his skin. He reaches into his shirt, pulls the strap to tighten the brace, and readjusts his clothes.
Agent Webb has concluded her interview, and she passes him in the hallway, "She's all yours."
Entering the room, Lincoln puts on a neutral face, "I'm sorry for the delay. Are you alright?"
Renee stands up from her chair and approaches the Detective, "Lincoln, It's been a long time."
"Look, this is just a precaution. You'll be safe here."
"That woman…" she says, referring to Agent Webb, "She's treating me like I'm a part of this."
Lincoln looks over his shoulder, then back to Renee, "I can't reveal much, but there is a connection between the murders and Jigsaw's accomplices."
Renee moves to the table and sits down, "I thought this was over. It's been over two years…."
"Have you been in contact with any of the other survivors?"
She sighs, "Not really, just Jeff…."
"You were close?"
Renee thinks about her response before answering, "He didn't do those things he was accused of… I-I trust him."
"What about the rest of the group?"
"The others? They never really liked me, and you don't often find someone who appreciates what John did."
Lincoln glances at her eye patch, "Why do you?"
She stares at her shoes and explains, "I always felt invisible, but he noticed me. I know it's stupid, but I needed this."
Her words resonated with Lincoln. He slid his hands against his chest and down to his hips. He could feel the Nitrous canister inside his pocket, left over from his session with Dr. Steward. A sudden craving was triggered, "We're going to keep you here as long as we have to."
Renee's face was tinged with sadness, "Lincoln, I can't." She says, distressed.
"What's wrong?"
She bits her lip, "It's not me I'm worried about… It's my Dad and Brother."
"There's no indication that they're in any danger."
"It's not that," She says, "My dad is sick. He needs me."
Lincoln's eyes wander, contemplative, "I'll tell you what, I'll send someone over there to make sure everything is alright, okay?"
"Thank you, Lincoln."
He moves towards the door, and she says, "Hey, maybe when this is all over, you can come by the Survivors Group and say 'Hello'? I think everyone would be happy to see you again."
Stopping at the door, Lincoln pauses and considers the suggestion. He slowly turns his head back to her and then exits the room.
Lincoln's desire to use was growing, but as he was about to exit the building, he was stopped by Chief Savino.
"Where are you going?" Savino asked.
Thinking on his feet, Lincoln replied, "I need to make a personal call."
"Can it wait?" Savino asked, "Have you finished the MP report?"
Lincoln can see Borden and Marlow through the Briefing Room window. Frustrated, he responds, "Just about. I'll bring it to you shortly."
He proceeded to the Briefing Room, where he sat at his desk and sifted through the Missing Person cases from the last ten years. While he researched the disappearances, the others read through a culled list of Jigsaw survivors and their last known whereabouts.
"Listen to this," Borden says, browsing a newspaper article, "Years after surviving Jigsaw's "final" test, "S.U.R.V.I.V.E" Author, Bobby Dagen, was found dead in his suburban home from a self-inflicted gunshot wound,'" He glances at Lincoln for a reaction, "Did you hear about this? … "While a suicide note was not present at the scene, it's speculated that he felt guilt for the death of his wife, Joyce… Dagen was outed as a fraud shortly after the death of John Kramer."
Borden sets the article down and comments, "Wrote a book called 'Survive' and then kills himself. No irony in that, huh?"
"How 'bout this," Marlow adds, "Mother and Son Killed in Car Accident Near Home Residence…." He traces the words with his finger, "It says Tara Abbot and her son Brent were killed in a collision after Tara lost control of the vehicle."
Listening to his colleagues recite the news articles, Lincoln couldn't help but imagine the victims' deaths. He keeps his emotions at bay and continues to glean information from the Missing Person files.
"Here's another one," Marlow says, "Jigsaw survivor, Mallick Scott, was pronounced dead today. After struggling with substance abuse, Scott was kidnapped and tortured by the infamous John Kramer... Neighbors reported a pungent odor next door, and the arriving officers discovered Mallick had overdosed on heroin and drowned in his pool…." Marlow looks at his colleagues solemnly, "He was found with a rubber band wrapped around his arm."
Borden squints his eyes and shakes his head, "This can't be a coincidence," he theorizes.
"What? You think they were murdered?" Marlow replies skeptically, "Who could do that?"
"Do you know Mark Hoffman? Do you know how many people he killed the night Jill Tuck died?" He took out three FBI Agents, including Peter Strahm, and a slew of cops."
"That was before I started," Marlow admits.
Lincoln turns to his associates and reveals, "Six of these Missing Person cases were also Jigsaw survivors; Joan Douglas and Morgan Tillman both disappeared four years ago, realtor Brit Stevenson from the Fatal Five trap, vanished three years ago. The list goes on."
A lite knock at the door indicates Logan's arrival. He enters the room with Agent Webb, holding pictures in his hand, "Detective," he says.
"Come in…"
He hands Lincoln an Autopsy Report, and Agent Webb stands beside him, "We've identified the tattooed woman. Her name was Pamela Jenkins. She was William Easton's sister."
"Another survivor." Unnerved, Lincoln asks, "What about the others?"
"Jeff Ridenhour never showed up," Borden said.
Marlow conjures a curious expression, "The Dentist?"
"Neurologist. He was lobotomizing patients…."
"Allegedly..." Lincoln adds.
Webb's face showed concern, "He hasn't called?"
"No, but Gavin Beck is under protection… Stupid, asshole," Borden said, "He wouldn't leave his house, so I got a patrol unit watching over him."
"I spoke with Neil Perri hours ago." Marlow notes, "He sounded drunk…."
"What did he say?" Lincoln asked.
"He wouldn't tell me where he was but said he'd be here… There's more. Simone Howard called out of work the last two days. Her manager received a text stating she was sick. I tried to reach her by phone, but no response."
Lincoln leans back, ruminating, "And Sarah Harper?"
"Nothing," Borden reveals, "but Chief Savino issued an All Points Bulletin on all of the survivors. We're putting her face on TV."
Stepping forward, Agent Webb asked, "Where's the tape from Gordon's apartment?"
"This way," Lincoln leads her to the VCR in the back of the room, "Did you find something?"
"Pamela Jenkins was investigating Jigsaw Copycats. We lost communication with her about a week ago."
Borden joins them at the TV, and Agent Webb rewinds the tape. Using the computer next to the VCR, she locates a folder from the cloud containing several videos. "Her last transmission was from this broadcast."
She presses play on the first recording, and they watch as a camera is positioned on the dashboard of a car.
Pamela captures the heavy clouds that filled the night sky. Raindrops exploded onto her windshield as she traveled up a gravel road towards a mysterious home. A black car was parked outside the house, but the license plate was out of view. She exited her vehicle and shielded her camera from the wind and rain.
"I've seen this before…." Lincoln said, "It was on the news the night Gordon died."
Agent Webb adjusts the footage, filtering it through different settings until everything is visible. The VCR has finished rewinding, and she links the tape with the content from the cellphone.
The front door is already open when Pamela tries knocking. She looks inside, "Hello? Is anybody here?"
The light switch doesn't seem to work, but Pamela proceeds cautiously into the residence and enters a nearby room. On the floor, she finds crayon drawings and children's toys.
"What are you hoping to find?" Lincoln asks.
"Hello?" Pamela repeats.
The body of a small puppet lays face down on the floor next to two small chairs. Upon turning it over, Pamela discovers the head has been smashed. Picking up one of the broken pieces, she realizes it's the Billy puppet Jigsaw would use in his traps. The doll starts to laugh, but it's labored and distorted. Next to the puppet, she finds a hammer and nails.
Pamela grabs the tool, "What the…?"
The front door slams shut, and Pamela yelps, frightened, but no one is there. Trembling, she holds the hammer in front of herself like a sword. The loud wind crashes against the frame of the building, and her nerves settle. She moves through the darkness and finds a door that leads into the next room. However, wooden boards have been nailed to the wall to prevent entry.
Setting her camera down but still recording herself, she uses the hammer to yank the nails out of the wood, one by one and then uses her strength to pry them from the wall. When the last board is removed, she grabs her camera and opens the door.
Two hands quickly pierce the darkness and rush towards her. A shirtless, emaciated man mumbles and grabs at Pamela, tearing her shirt. She drops her phone and attempts to fight him off, smacking him several times with the hammer. Blood spews from his head, and he collapses to the floor.
Pamela grabbed her phone and checked on the lifeless man; his mouth hung open, and she could see his tongue had been cut out. His body is filthy, and his fingers are covered in blood from scratching at the walls.
"Fuck! …Shit!" She says. The footage stops suddenly.
Agent Webb suggests, "We think she tried to call the police." She clicks on the following video.
The footage returns, and they can hear Pamela panting. She walks into the next room, where the man was held captive.
The light flickers as the battery dies on her phone, and they can hear her slapping the camera. Pamela is startled by the sudden appearance of a corpse with a rusty pipe impaled through its neck. The cadaver is a reddish-brown, having been deceased for some time.
"Oh my god," she says, positioning her camera closer to the body.
A bright light in the hallway turns on, and she tilts her camera towards the luminescence. She could now hear the alarming moans of someone in jeopardy through the walls.
Agent Webb inhales and grinds her teeth. Watching both monitors, they prepare for the next scene.
Pamela moves fearfully into the hallway. Her heart is racing, and a surveillance camera captures her every move. Several floorboards have detached from the foundation, and there are scratch marks on the walls as if someone was dragged. Her teeth chatter, and she proceeds nervously towards the muffled groans, the floorboards creaking with her every step.
A masked figure appears behind her, their presence announced by the audible floorboards, but before she can turn around, the hooded man smacks her in the head. The video ends, but the surveillance camera records her grisly fate.
Webb notices something on the wall and rewinds the tape for several seconds. She positions the computer next to the television, restarts the cellphone footage, and pauses the content when she sees the same marking.
"Do you see that?"
With both screens side-by-side, they can now see the symbol of Ankh.
Lincoln leans forward, "What does it mean?"
"The "Ankh" is the Egyptian symbol for Eternal Life," she says, "In the last message we received from Pamela, she said she was investigating the Gideon Meat Packing Plant. I think she followed that car to this location."
"It can't be too far from the plant," Borden theorizes.
"Did you notice the toys and chairs? I think this is a Children's DayCare… I'm going to pull up the city records…."
"Marlow can help you with that," Lincoln says, "Simone Howard doesn't live too far from here. Frank and I will go get her."
***
TO BE CONTINUED...
submitted by ohhidied to saw [link] [comments]


2023.03.22 14:13 Stemmystemm The computer restarted unexpectedly or encountered an unexpected error. Windows installation cannot proceed. To install Windows, click "OK" to restart the computer, and then restart the installation.

I had reset my HP laptop yesterday and I ran into this message on my screen when I turned it back on to set it up. How do I fix this and what is the problem? It shows up after I hold the power button and get to the black start up screen. I also updated my laptop before I thought of resetting it.
Model 14-cb172wm HP Stream Laptop
There isn’t much I can do from this screen besides the X and OK which I have done already. Are there any buttons I could press to get me somewhere?
(Screenshot in the comments)
submitted by Stemmystemm to WindowsHelp [link] [comments]


2023.03.22 14:04 Vinod_cr7 New changes that will come in Season 3. Sound change on existing guns.

New changes that will come in Season 3. Sound change on existing guns. submitted by Vinod_cr7 to CallOfDutyMobile [link] [comments]